Remove the support lugs from frames
1 to 4 and the keel 5.
5
1
2
3
4
1
2
3
4
Glue the stringers 15 in place, followed by
stringers 12, 13 and 14. Glue the
reinforcements 24 to the keel 5.
16
16
17
Glue the cockpit sides 16 and
the cockpit front panel 17 in
place.
12
13
14
14
13
12
15
24
5
7
8
9
Apply several coats of sanding sealer or
boat lacquer to the inside of the hull to
waterproof it, but do not apply the lacquer
to the top edge of the frames and stringers.
10
To Next Page
Loading...