Hyd ra ulic
Sabre Saw
5 1219 0010
Ma s ch in e n f a br ik Gmb H
Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29, www.spitznas.de
Translation of the original operation
manual, compiled: 21.03.13
512190010_BA_en_Version_02 Page 3 of 13
Accessories: Saw blades
Length
mm
Tooth pitch
mm
Application and Materials, etc.
Quantity/per
Part Number
280 2.5 Wood with nails, Non-ferrous metal, Plastic 2 9 2505 0020
280 4.0 Wood, Plastic for fast rough cuts 5 9 2505 0040
110 0.7 Mild steel, Non-ferrous metal, Alu up to 1.5mm
5 9 2505 0060
150 1.2 Mild steel, Non-ferrous metal, Alu up to 3.0mm
5 9 2505 0080
150 2.5 Mild steel, Non-ferrous metal, Alu up to 5 mm 5 9 2505 0100
SAFETY INSTRUCTIONS
Any power tool can be dangerous.
Please follow these simple procedures.
They are for your protection.
Wear goggles ( chips – risk of injury)
Wear gloves (cutting damages by sharp edged work pieces)
Wear protective clothing
Remove rings, watches, ties etc. that could be torn by the machine.
Dress properly. Do not wear loose clothing or jewellery, it can be caught in
moving parts.
Follow the general current and appropriate Accident Prevention and Safety
Procedures.
Never work under the influence of alcohol, drugs or stronger medication.
Always make sure that you have a safe foothold.
Maintain a proper footing and balance at all time. Never work with the machine
while standing on a ladder or leaning against a scaffold.
To Next Page
Loading...