Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29, www.spitznas.de
Translation of the original operation
manual, compiled: 21.03.13
512190010_BA_en_Version_02 Page 5 of 13
Follow the valid national provisions in the country of application.
Do not operate tool at fluid temperatures above 140° F/ 60°C. Operation at
higher temperatures can cause higher than normal temperatures at the tool,
which can result in operator discomfort.
Keep hands away from cutting area.
Always use sharp saw blades.
Stay clear off end pieces that may fall down after being cut off.
Always use the correct saw blade recommended for the material being cut.
Do not operate the saw with support shoe removed.
Some wood contains preservative which can be toxic.
Take extra care to prevent inhalation and skin contact. Request, and follow, any
safety information available from your material supplier.
Do not attempt to plunge cut metal.
ATTENTION! Never use the flexible hose as a lifting handle!
Use
Intended Use
Skilled personnel only is allowed to operate the machine.
The sabre saw is the ideal tool for light repair work. The valve trigger adjusts the cutting speed on
the material being cut. The movable support shoe enables the safe running even in heavy material
and also permits a good view at the cutting point. Special applications:
old building renovation
fitting of sanitation / pipe repair
car body building
in all areas difficult to reach
The sabre saw is designed for cutting wood up to thickness of 160 mm, steel up to 19 mm, and
several materials like plastics, glass fibre, hard rubber etc.
Improper Use
Working without personal protection equipment.
Any use deviating from the intended use as described is considered to be improper use. We
recommend strongly to refrain from modifications and / or inappropriate use.
To Next Page
Loading...