SPL Phonitor One - Page 2

2 Phonitor One
Read the security advices on page 6!
Read the installation instructions of the included
external power supply on page 8.
Make sure that the power switch on the rear is set
to O (O = out position / ON = in position).
Connect the included power supply to the DC input
and an appropriate mains socket outlet.
Turn down volume.
Connect your headphone to the headphone output.
Connect your analog sources to the line inputs.
Switch the Phonitor One on by pressing the power
button.
Choose an input.
Set the volume and the crossfeed to taste.
Have fun!
More information: SeriesOne.spl.audio
8
9
10
11
1
2
3
4
5
6
7