SPL Vitalizer Mk3-T - Getting Started; Power off

Vitalizer Mk3-T – Manual
2
Getting started
Read the safety instructions starting on page 9.
Make sure that the mains voltage of the Vitalizer Mk3-T corresponds to the voltage of your
region and that the fuse has the correct value for the selected voltage (see specications
on page 8).
The power switch on the back of the Vitalizer Mk3-T must be in the o position.
(O = O / On = I).
Connect the supplied power cord to the power connector of the Vitalizer Mk3-T and to a
power outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
The devices that are to be connected to the Vitalizer Mk3-T must be be switched o.
Connect your devices with appropriate audio cables (XLR or TRS) to the inputs and outputs
of the Vitalizer Mk3-T.
Audio cables not included in the scope of delivery.
Power on
Switch on the power switch on the rear panel of the Vitalizer Mk3-T (On = I).
The PWR LED and all activated switches light up.
Power o
Switch o the power switch on the rear panel of the Vitalizer Mk3-T (O = O).
The PWR LED and all activated switches no longer light up.