Step 9: Filling in the Details
1. Assemble the Safety Strap with the Plastic Spline.
2. Attach it directly below the top Exterior Step.
3. SplashLadder locked in the “open” position.
4. SplashLadder locked in the “closed” position.
5. Place the Warning Label on the outside of an Exterior
Step.
WARNING: Shallow water! Never jump or dive
into any above ground pool; serious bodily
injury could occur.
If you have any questions on the assembly of the
SplashLadder, please call your local Splash dealer.
7
©
2003-Splash Superpools Ltd.
Parts Needed:
K. (1) Plastic Strap (Spline)
R. (1) Warning Label
1
234
R
K
5
To Next Page
Loading...