Data di emissione: Maggio, 2016 Revisione: 6 Pag. : 47/64
8. OPERATING INSTRUCTIONS AND
START-UP PROCEDURES
!IMPORTANT!
BEFORE STARTING THE MACHINE, CARRY OUT
THE CLEANING AND SANITISING PROCEDURES
DESCRIBED IN CHAPTER 9.
- Dilute and mix the product in a separate
container according to the manufacturer’s
instructions (see fig.4).
- Pour the mix obtained into the bowl (see
fig.5).
- Restore the secondary cover and then the
main one.
Note -----------------------------------------------
SP units are equipped with a very efficient
safety mechanism designed to protect the
operator; it is activated when cover is lifted.
This device automatically and immediately stops
all moving parts.
If the main cover is not correctly
positioned, the correspondent mixing
system will not work.
------------------------------------------------------
- Insert the plug into the electrical power outlet.
- Activate the main switch on the right side of
the machine, the scraper auger will
automatically start rotating.
- Activate the FROZEN mode by switching on
the snowflake button (right side, small button,
position I, see fig.6).
Fig. 4
Fig. 5
Fig. 6
To Next Page
Loading...
Need help?
General
