Need help?Do you have a question about the SPM SP1 and is the answer not in the manual?
General| Brand | SPM |
|---|---|
| Model | SP1 |
| Category | Kitchen Appliances |
| Language | English |
Details technical and electrical specs found on the machine's plate.
States installation and servicing must be by trained personnel.
Guidance on machine placement for ventilation and temperature.
Verify power requirements match machine specs.
Emphasizes following manufacturer's installation instructions.
Notes connection procedures are for qualified personnel.
Explains electrical safety relies on a proper earth system.
Prioritizes data plate specs over manual info.
Recommends a socket with a thermal cut-out switch.
Prohibits extensions and multiple adaptors.
Crucial pre-operation step: perform cleaning and sanitizing.
Importance of regular cleaning for operation and compliance.
Safety warning about water contact with electrical components.
Guidance on using approved sanitizers to prevent health hazards.
Safety precautions before disassembling for cleaning.
Critical step to remove o-rings for proper sanitization.
Warning against using harsh cleaning agents.
Prohibition of using a dishwashing machine for cleaning.
Warning against over-tightening bowl knobs to prevent damage.
Warning about improper tap insertion affecting sealing.
Important restriction on the duration of sanitizer contact.
Instructions for monthly cleaning of the condenser for optimal performance.
Warning against using sharp objects for cleaning condenser fins.
Troubleshooting for cooling issues with a running compressor.
Troubleshooting for cooling issues when the compressor is off.
Identifying and resolving noise issues with the machine.
Diagnosing why the machine won't start when powered on.
Steps to address leaking issues with the product bowl.
Troubleshooting for leaks from the dispensing valve.
Resolving issues where product flows into the drain tray.
Diagnosing why the auger is not rotating.
Addressing abnormal noise from the rotating auger.
Interpreting and resolving the "E1" error message on the display.
To Next Page
