Data di emissione: Maggio, 2016 Revisione: 6 Pag. : 51/64
- Stop the freezing system and let the machine
run with the only auger activated (position O for
the small button, position I for the main one) for
ten minutes.
- Provide yourself with a sanitizer suitable for
plastic, rubber and stainless steel objects
(AMUCHINA®).
IMPORTANT
Carefully follow the mix producer
prescriptions in terms of time and modes
of conservation.
- After unlocking the main cover with its key
(fig.10), remove the main cover and the
secondary one under it (fig.11).
- Pour lukewarm water into the bowl (fig.12)
and, after re-positioning the main cover, make
the scraper auger rotating for some minutes.
NOTE
SP is equipped with a very efficient safety
mechanism, activated when the cover is lifted,
designed to protect the operator. If the cover
is not correctly positioned SP will not work.
- Empty the bowl and repeat the same
operations until the coming out water is clear
(fig.13).
Fig. 10
Fig. 11
Fig. 12
Fig. 13
To Next Page
Loading...
Need help?
General
