BANTAM – OPERATIONAL INSTRUCTIONS
PAGE 4 WWW.4X4sPOD.COM
Open the Bantam app and touch Setup.
Touch the Scan button and wait 10 seconds.
Hit Cancel and wait about 10 seconds for the PIN to
appear in upper left (in White). Touch the Setup button.
Touch the Scan button and wait 10 seconds.
When “Pairing Request” dialogue box appears, enter PIN number and then touch the Pair button. The app will now be
paired to the Bantam and will be ready to use.
To reset pairing with all devices, turn DIP switch #1 on and off 5 times quickly.
With the app closed and off, flip DIP switch 1 “ON” then “OFF” in quick succession to put the Bantam in “PAIRING
MODE” for 60 seconds.
Start by going to Google Play for Android devices or iTunes for Apple devices and search “sPOD Bantam”.
Download the sPOD Bantam app onto your smartphone or tablet. Be sure that your device’s Bluetooth is turned on.
PLEASE REFER TO THE BANTAM
APP GENERAL USER GUIDE FOR
OPERATIONS OF THE APP.
INSTRUCTIONAL VIDEOS ALSO
AVAILABLE AT
WWW.4X4sPOD.COM
To Previous Page
Loading...