Spokey STEPPEN X - Important Precautions; Assembly; Computer Assembly; Pedal Steady Pin Insertion

2 | EN | instruction
EN INSTRUCTION
1. IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the
following precautions and all instructions in this manual
before using the 3 in 1Stepper.
1. It is the responsibility of the owner to ensure that all users
ofthestepper are adequately informed of all precautions.
2. Use the stepper only as described.
3. The stepper is intended for home use only. Do not use the step-
per in a commercial, rental, or institutional setting.
4. Place the stepper on a level surface. Cover the oor beneath
thestepper to protect the oor or carpet.
5. Inspect and properly tighten all parts often. Replace any worn
parts immediately.
6. Keep children under the age of 12 and pets away from the step-
per at all times.
7. Keep hands and feet away from moving parts.
8. Always wear appropriate clothes, including athletic shoes
forfoot protection, when using the stepper.
9. Always keep your feet on the pedals when stepping and be care-
ful not to lose your balance. It is recommended that you place
the stepper near a wall or a chair for support.
10. The resistance cylinders become very hot during use Allow the
resistance cylinders to cool before touching them.
Thank you for selecting the new Mini Stepper. Stepping is
one of the most eective exercises for in creasing cardio-
vascular tness, building endurance, and toning the body.
The compact Mini Stepper lets you enjoy this exercise in the
convenience of your own home.
For your benet, read this manual carefully before using the
Stepper.
2. ASSEMBLY
Step 1:
1. Embed computer cover(42) to the front post,then connect sensor
wire(44) with the computer wire(43)
2. Setting battery (46)into the computer(43),then attach the com-
puter(43) to the computer cover(42).
Step 2:
Insert round pin (41) to the fonst hole (as following picture shown)
to make pedal steady