EasyManua.ls Logo

Sportec Compex FIT 3.0 - User Manual

Sportec Compex FIT 3.0
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
xxkdhrt//§bneülld7653...hge
Art.Nr.: 29217 zum Produkt
Muskelstimulation zur Kategorie…
Bedienungsanleitung
Compex Muskelstimulator FIT 1.0

Table of Contents

Questions and Answers

  • M
    Madison BoydAug 9, 2025
    What to do if Sportec Compex FIT 3.0 stimulation doesn't feel normal?
    • V
      vthomasAug 9, 2025
      If the stimulation from your Sportec Fitness Equipment doesn't feel as it usually does, first ensure that all settings are correct and that the electrodes are properly positioned. If the issue persists, try slightly changing the position of the electrodes.
  • T
    Tonya SheltonAug 15, 2025
    Why does Sportec Compex FIT 3.0 Fitness Equipment stimulation cause discomfort?
    • R
      richardreidAug 15, 2025
      Discomfort during stimulation with your Sportec Fitness Equipment can occur if the electrodes are worn and need replacement, as they may have lost their adhesive capacity, resulting in poor contact with the skin. Also, try slightly changing the position of the electrodes.
  • A
    Ashley BakerAug 21, 2025
    How to fix electrode fault on Sportec Compex FIT 3.0?
    • D
      Donald JohnsonAug 21, 2025
      To address an electrode fault on your Sportec Fitness Equipment, first check that the electrodes are correctly connected to the appropriate channel. If the electrodes are old, worn, or making poor contact, try replacing them with new ones. As an additional step, test the stimulation cable on a different channel; if the cable remains faulty, it should be replaced.
  • R
    Robert AllenAug 27, 2025
    What to do if the Sportec Fitness Equipment battery is very flat?
    • R
      Ronald SilvaAug 27, 2025
      If your Sportec Fitness Equipment indicates that the battery is very flat, switch off the device and connect the charger. If the battery is extremely flat, a recovery cycle will automatically begin, lasting for approximately 2 minutes.
  • C
    chadhigginsSep 1, 2025
    How to maintain Sportec Fitness Equipment battery?
    • C
      Colleen RothSep 2, 2025
      To maintain your Sportec Fitness Equipment battery, it's highly recommended to perform a charge/discharge cycle. You can initiate this cycle by pressing the channel 4 button, and it may take up to 12 hours to complete. If the battery is faulty, it must be replaced.

Summary

How Electrostimulation Works

Stimulation of Motor Nerves (EMS)

Explains how EMS works by mimicking voluntary contraction.

Stimulation of Sensory Nerves

Explains how sensory nerves stimulation provides pain relief.

MI (Muscle Intelligence) Technology

MI-SCAN Function

Probes muscle group and adjusts settings based on physiology.

Device Functionality

Adjusting Stimulation Intensities

How to increase stimulation intensities for a successful session.

Troubleshooting

Electrode Faults

Identifies electrode connection and contact issues and suggests solutions.

Sensation and Discomfort Issues

Addresses lack of sensation and stimulation-induced discomfort.

Stimulator Not Working

What to do when an error screen appears, noting the error number and contacting support.

Battery Issues

Guides on what to do when the battery is very flat or needs replacement.

Device Maintenance and Standards

Technical Specifications

Details general specs, neurostimulation parameters, and EMC information.

Sportec Compex FIT 3.0 Specifications

General IconGeneral
BrandSportec
ModelCompex FIT 3.0
CategoryFitness Equipment
LanguageEnglish

Related product manuals