What to do if Sportec Fitness Equipment stimulation doesn't feel normal?
If the stimulation from your Sportec Fitness Equipment doesn't feel as it usually does, first ensure that all settings are correct and that the electrodes are properly positioned. If the issue persists, try slightly changing the position of the electrodes.
Why does Sportec Compex SP 4.0 Fitness Equipment stimulation cause discomfort?
Discomfort during stimulation with your Sportec Fitness Equipment can occur if the electrodes are worn and need replacement, as they may have lost their adhesive capacity, resulting in poor contact with the skin. Also, try slightly changing the position of the electrodes.
How to fix electrode fault on Sportec Compex SP 4.0 Fitness Equipment?
To address an electrode fault on your Sportec Fitness Equipment, first check that the electrodes are correctly connected to the appropriate channel. If the electrodes are old, worn, or making poor contact, try replacing them with new ones. As an additional step, test the stimulation cable on a different channel; if the cable remains faulty, it should be replaced.
What to do if the Sportec Compex SP 4.0 Fitness Equipment battery is very flat?
If your Sportec Fitness Equipment indicates that the battery is very flat, switch off the device and connect the charger. If the battery is extremely flat, a recovery cycle will automatically begin, lasting for approximately 2 minutes.
How to maintain Sportec Compex SP 4.0 battery?
To maintain your Sportec Fitness Equipment battery, it's highly recommended to perform a charge/discharge cycle. You can initiate this cycle by pressing the channel 4 button, and it may take up to 12 hours to complete. If the battery is faulty, it must be replaced.
Probes muscle excitability to automatically adjust settings, optimizing program start and user physiology.
Limits unwanted contractions in painful areas by reducing intensity if muscle contraction is detected.
Indicates the ideal intensity range for specific programs like recovery, massage, and pain relief.
Explains the process of performing the MI-Scan test to adapt stimulation to individual muscle excitability.
Guides on increasing stimulation levels for effective session performance and achieving desired results.
Addresses issues related to electrode connection, wear, and contact quality for optimal performance.
Covers problems with stimulation not producing usual sensation or causing discomfort due to electrode issues.
Addresses error screens, device failure, and very flat battery conditions requiring attention or charging.
Details electrical specifications like impedance, channels, impulse form, intensity, amplitude, and frequency.
General| Number of Channels | 4 |
|---|---|
| Programs | 30 |
| Intensity Levels | Adjustable |
| Battery | Rechargeable |
| Categories | Fitness, Recovery, Rehabilitation |
| Type | Muscle Stimulator |
| Portability | Portable |
| Usage | Professional |
To Next Page
