Need help?Do you have a question about the Sportop RO 700 and is the answer not in the manual?
Remove two preassembled screws from the main frame and two from the supporting tube.
Connect the right pedal supporting tube to the main frame using provided tools.
Align and connect the right lower pedal supporting tube to the front pedal tube.
Firmly tighten the preinstalled screw and nut for the pedal supporting tube.
Repeat the pedal supporting tube assembly steps for the left side.
Connect console wires from the supporting tube to the main frame wires.
Slide the console supporting tube onto the main frame, storing excess wires.
Tighten the four screws firmly to secure the console supporting tube.
Guide to selecting and setting up Manual or Program training modes.
Details on Heart Rate Control mode and its automatic resistance adjustments.
General| Brand | Sportop |
|---|---|
| Model | RO 700 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page
