To Next PageTo Next Page
Need help?Do you have a question about the SportRack EXPLORER and is the answer not in the manual?
General| Brand | SportRack |
|---|---|
| Model | EXPLORER |
| Category | Travel & Luggage |
| Language | English |
Attach foam weather stripping to the carrier top.
Install lock assemblies and ensure correct orientation.
Attach hinges to the carrier bottom with screws and nuts.
Connect the top and bottom parts of the carrier using screws and washers.
Attach support assemblies with screws, washers, and insert nuts.
Secure front and back snap latches to the carrier bottom.
Attach lock brackets to the carrier bottom passenger side.
Verify and adjust lock assembly alignment for proper engagement.
Close the carrier by ensuring locks are open and pulling the top down.
Lock the carrier, engage snap latches, and follow safety precautions.
Install U-bolts through the carrier bottom and crossrails.
Periodically check all mounting hardware for tightness.
Use vinyl covers to protect unused holes from water entry.
Instructions for cleaning with soap and water and proper storage.
Contact information for obtaining replacement keys for lost or misplaced keys.
