ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre (+44) 0330 0904 420, Email support@sportspowerfit4kids.com or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 2 OF 25
•
•
•
•
•
•
•
•
•
We suggest you spend some time reading this guide before following
the simple step-by-step assembly instructions.
Do not discard any of the packaging until you have checked that
you have all parts and fittings listed. When discarding packaging
take care and consideration for others and the environment.
When assembling this equipment be aware of the safety of yourself
and others.
Because of the size of this multiplay we suggest that you assemble
it in the area intended for use.
Some of the assembly will be easier with two people. Seek assistance
when lifting large or heavy items.
Assemble this multiplay on a clean, flat and level surface e.g. the
cardboard packaging.
Keep any tools provided or spare fittings for future use. Only use
the tools specified.
Assemble all parts loosely, by hand, before tightening any bolts or
fixings.
we would suggest storing your multiplay inside or under a suitable
cover during winter to help protect against damage and maintain its
aesthetic appearance. For details of how to maintain your playset,
please refer to “maintenance section”.
BEFORE STARTING ASSEMBLY, PLEASE CHECK ALL PARTS ARE
INCLUDED. IF ANY PARTS ARE MISSING PLEASE CONTACT THE
HELPLINE ON (+44) 0330 0904 420.
To Next Page
Loading...
