What to do if my SPORTSTECH Fitness Equipment does not start?
If your SPORTSTECH Fitness Equipment isn't starting, there are a few things to check: * Ensure the electrical power cable is correctly connected at both ends. * Verify that the power switch is turned on, so the display lights up. * Check if the fuse has tripped and, if so, switch it on again or have it replaced.
Why does my SPORTSTECH Fitness Equipment make loud operating noises?
Loud operating noises from your SPORTSTECH Fitness Equipment can be due to: * The device being placed on a hard surface. Placing the device on an underlay may reduce the noise. * The device not being horizontal. Adjust the feet to align the unit horizontally.
How to fix error code ER01 or ER02 on SPORTSTECH Fitness Equipment?
If you see error code "ER01" or "ER02" on your SPORTSTECH Fitness Equipment, it could indicate a motor problem. Switch off the device, disconnect it from the electrical grid, and then restart it.
What to do if the wristband remote control does not work for SPORTSTECH Fitness Equipment?
If the wristband remote control for your SPORTSTECH Fitness Equipment isn't working: * The battery may be empty. Replace the battery. * You might be too far from the device. Step closer to the device.
General| Brand | SPORTSTECH |
|---|---|
| Model | VP500 |
| Category | Power Tool |
| Language | English |
To Next Page
