Spotnails SFN19 - Technical Data

TECHNICAL DATA
Type of tool
SFN19 Construction Coil Nailer
Dimensions
11-1/8”X4-1/4”X10-1/8”
248mmX108mmX260mm
Weight (without fasteners)
1.60kgs (3.50lbs.)
Actuation mode
Contact/Single-sequential actuation
Magazine capacity
200 nails (plastic sheet collated nails)
Maximum allowable pressure
120psi (8.3bar)
Recommended pressure range
70psi to 100psi (5bar to 7bar)
Fasteners
Only the nail sizes shown in the table below can be driven with this nailer.
15° Flat plastic sheet collated nails