Spraying Systems Co AutoJet 1000+ User Manual (English)

Other manuals for Spraying Systems Co AutoJet 1000+

Questions and Answers:

J
Janice WilliamsAug 2, 2025
Why are the nozzles not spraying on my Spraying Systems Co AutoJet 1000+ Control Panel?
- C
  cprinceAug 2, 2025
  If the nozzles on your Spraying Systems Co. Control Panel aren't spraying, first check the nozzles and cords for shorts and ensure the nozzles aren't clogged. Then, check the trigger on the diagnostics page for your channel. When triggered, you should see a '1' for that input. If not, inspect the trigger or sensor wiring/installation. If you're using your own sensor, verify it's wired according to the wiring diagram and is NPN style.
M
Matthew WalkerAug 5, 2025
What to do if the sensor light is on but the nozzle doesn't spray on Spraying Systems Co AutoJet 1000+ Control Panel?
- C
  cindy74Aug 6, 2025
  If the light on the sensor of your Spraying Systems Co. Control Panel lights up, but the nozzle doesn't spray, ensure your recipe is set correctly with a timing mode and values for spray initiation. Also, check your spray delay value. For example, a value of 200 seconds means the nozzle won't spray until after that delay.
T
Thomas MccallAug 10, 2025
Why is the green light indicator not lit or flashing on my Spraying Systems Co AutoJet 1000+ Control Panel?
- T
  Timothy GarciaAug 10, 2025
  If the green light indicator on your Spraying Systems Co. Control Panel is not lit, check the power at the wall or the internal fuse on the DIN rail, and replace it with an MDA-5-R, 5 amp, 1/4"x1- 1/4", ceramic, slow blow. If the light is flashing green, a system fault is present. Look on the HMI for the active fault and clear it. A flashing green light may also indicate a low tank; fill the tank for channel A or B and clear the fault from the screen.
A
Anne SolisAug 14, 2025
How to reset user passwords on Spraying Systems Co AutoJet 1000+ Control Panel?
- J
  Jeremy HernandezAug 14, 2025
  If you've forgotten your user password for the Spraying Systems Co. Control Panel, the high-level password is 77777777. Type this in when prompted to change or view the password table. Change it if necessary, and ensure only engineers and managers have access to it.
B
Bailey KaufmanAug 18, 2025
What to do if Spraying Systems Co AutoJet 1000+ shows 'Too Many Trigger' error?
- C
  Colton ZimmermanAug 18, 2025
  If you're experiencing 'Too Many Trigger' errors on your Spraying Systems Co. Control Panel, it's likely because the external trigger is being turned on/off/on too quickly based on the current settings. Adjust the trigger frequency to resolve this issue.

Spraying Systems Co AutoJet 1000+ Specifications

General

Brand	Spraying Systems Co
Model	AutoJet 1000+
Category	Control Panel
Language	English

Spraying Systems Co AutoJet 1000+ Quick Start Guide

Table of Contents

Other manuals for Spraying Systems Co AutoJet 1000+

Questions and Answers:

Spraying Systems Co AutoJet 1000+ Specifications