SPRI BALANCE TRAINER User Manual

BALANCE TRAINER
#BETTEREVERYDAY
SETUP, WORKOUT TIPS, AND CARE & SAFETY GUIDE
Please read before setting up or using your Balance Trainer.
TOOLS NEEDED:
Balance Trainer pump (you may want to use a bicycle pump or compressor for initial inflation).
SETUP
1. Remove Balance Trainer from box and check for shipping damage. (Note: It is normal for
domes to have slight creases or fold marks when first inflated.)
2. Allow Balance Trainer to reach room temperature before inflating.
3. Attach inflator tip to Balance Trainer pump. Alternatively, the inflator tip can be used with
most standard bike pumps. Insert inflator tip into hole in Balance Trainer. Inflate Balance
Trainer to the desired height and firmness.
4. Remove inflator tip from ball and immediately insert plug into hole so head is flush with surface of
ball.
INFLATION NOTICE
• Inflate Balance Trainer and plug.
• Balance Trainer may not inflate to 100% of size on initial inflation.
• Wait 24 hours.
• Deflate 50% and inflate again.
• Due to the material, the trainer will increase to proper size with second inflation.

SPRI BALANCE TRAINER Specifications

General

Brand	SPRI
Model	BALANCE TRAINER
Category	Fitness Equipment
Language	English

Summary

Setup and Inflation

Tools Needed

List of required tools for setting up the balance trainer, including pump options.

Inflation Process and Notices

Step-by-step instructions for inflating the balance trainer and important notes on initial inflation.

Care and Workout Tips

Maintenance and Deflation

Instructions for cleaning the balance trainer with mild soap and safely deflating it.

Exercise Best Practices

Guidelines for performing exercises with smooth, steady motion and without strain.

Safety Precautions

General Health and Usage Safety

Essential safety advice including consulting a doctor, weight limits, and safe usage environments.

Warranty and Liability Disclaimer

Information regarding product warranty and the manufacturer's disclaimer of liability.