26
8 Scope of delivery
The package contains:
1 x Induction unit
1 x Non-stick coated grill plate made of cast aluminium
1 x Operating instructions
9 Servicing/Maintenance
Servicing and maintenance are limited to Cleaning as described in Chapter 7.
10 Repairs
Repairs may be made by the manufacturer or an authorized technician only. If you have any questions, contact
your dealer or our customer service.
11 Troubleshooting
Disorder Possible cause Troubleshooting
The On/Off button
does not blink.
1. No / insufficient supply voltage.
2. Internal defect.
1. Insert the mains plug of the appliance into a
suitable socket. Make sure the socket has the
correct voltage.
2. Contact your sales or service office.
The appliance does
not heat.
1. The grill plate is not placed
properly.
2. The cookware is not suitable for
induction, or the bottom diameter
is too small.
3. The cookware is not placed in the
middle of the glass ceramic surface.
4. The overheat protection
is activated.
5. Internal defect.
1. Place the grill plate properly on the appliance.
2. Use appropriate cookware according to chapter
6.2. Application possibilities.
3. Center the cookware using the marking on the
glass ceramic plate.
4. Allow the appliance to cool down.
5. The appliance is defective. Contact your sales or
service office.
The appliance
interrupts the
operation.
1. The overheating protection has
been activated.
2. Internal defect.
1. Make sure that the cookware has not cooked
empty. Remove the cookware carefully from the
glass ceramic plate and allow the appliance to cool
down. Ensure unhindered air circulation.
2. Contact your sales or service office.
BA_Induktionsgrill Kochplatte SPIRIT 31 2828 59 01.qxp_GA 18.03.24 16:08 Seite 26
To Next Page
Loading...