5
SCAN HERE or visit http://springfr.ee/step-5 for a helpful installation video for Step 5.
NOTE - As you install the white mat rods into the mat rod sockets the net will become tight
against the frame. Handle the net with care and be sure that it does not get caught or it may
tear.
Locate the green tag on the bottom edge of the net and match it with one of the green stickers
on the frame.
Holding the net so that the green tag is facing you, gently place the rest of the net inside the
frame as shown. DO NOT let go of the green tag.
Put a white mat rod through the hole to the immediate left of the green tag in the net and then
into the mat rod socket next to the green sticker.
Then, working carefully around the frame, insert the remaining white mat rods through the net holes
and into the corresponding mat rod socket. When nished, the net should be stretched tightly
around the OUTSIDE of the frame.
Be sure that the white mat rods are seated down to the bottom of each mat rod socket.
To Next Page
Loading...