What to do if the mixing chamber/blades are not clean after the automatic self-cleaning programme in Springlane Mila Mini?
If the mixing chamber or blades aren't clean after the automatic self-cleaning program, add a drop of detergent and select the intensive cleaning mode. You can also gently wipe off any residue by hand using a damp cloth.
What to do if there is water underneath my Springlane Mila Mini Kitchen Appliances?
Ensure both the water and collection containers are securely closed. Also, check that the collection container hasn't overflowed.
Why does my Springlane Kitchen Appliances beverage taste sandy?
A sandy taste in your beverage can occur if too many ingredients are used. Try reducing the quantity of ingredients. Alternatively, soak the ingredients before processing them. You can also soak and chop the ingredients before preparation. Filtering the beverage through a sieve to remove any chunks is another helpful solution.
What to do if the motor is overloaded in Springlane Mila Mini Kitchen Appliances?
If the motor is overloaded due to too many ingredients, reduce the amount of ingredients. Make sure you also clean the machine.
What to do if temperature sensors are sticky in Springlane Mila Mini Kitchen Appliances?
If the temperature sensors are sticky or there are too many ingredients, reduce the amount of ingredients. Also, clean the sensors inside the mixing chamber.
Alerts to hazards from symbols, appliance damage, or injury.
Covers safe connection and handling of electrical components.
Instructions for connecting, switching on, selecting programs, and pouring.
Describes the appliance's self-cleaning functions and manual cleaning options.
Lists error codes (E01-E04) and their corresponding problems.
Explains error codes (E05-E15) related to motor, sensors, and electrical faults.
General| Brand | Springlane |
|---|---|
| Model | Mila Mini |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
