Sprint 250U User Manual

utility.com
INSTRUCTION GUIDE
Inserting the
Sprint 250U 3G/4G Modem
in the Rocket Lid
Items Needed
1. Rocket with New Retrofitted Lid
2. Direct Connect Cable
3. USB Extension Cord
4. Polycarbonate Lid Insert
5. Sprint 250U 3G/4G modem
Installing the Sprint Modem
1. 2. 3. 4. 5.
• On the Sprint 250U 3G/4G modem, open the USB connector all
the way until it clicks into place.
• Plug in the Direct Connect Cable into the front port
on the left side of the modem, as shown below.
• Plug the USB extension cord into the modem, as shown
below.
direct
connect
slot
USB
slot
• Locate the two
holes on the
polycarbonate
insert, and drop
the direct connect
cable through
the left hole.
• Insert the modem’s USB Connector through the center hole,
as shown below and fold the USB connector all the way to
hold the polycarbonate lid insert in place.

Sprint 250U Specifications

General

Brand	Sprint
Model	250U
Category	Modem
Language	English