22 Section 2B: AIRAVE: The Basics
䢇 The base station is a Plug & Play device that can be
installed to automatically provide continuous wireless
telephone service in a home or small office without
having to change your existing mobile phone (page 10).
䢇 The base station utilizes an internal GPS receiver to get
both timing and unit location information. In case of a
weak GPS signal, use the optional external GPS antenna
(page 26).
Maintenance Notes
These notes should be carefully reviewed before using the base
station:
䢇 See “General Precautions” on page 38.
䢇 Only connect the base station’s power plug to a 110–125
VAC outlet.
䢇 When cleaning the AIRAVE, first unplug the connector
from the power outlet. Do not clean the base station
using chemical solvents or detergents, but with an anti-
static cleaning pad.
䢇 The AIRAVE should be placed at least 1-2 feet away from a
Wi-Fi router.
䢇 Do not obstruct the heat vents by blocking the openings
or covering the base station.
䢇 Remove the base station’s power connector from the
power outlet if the base station will not be used for an
extended period.
To Next Page
Loading...
