© 2021 SPT Labtech Ltd
To pause after aspirate and before tips leave the well, edit the Pause seconds.
Here’s the owchart to aspirate with pre- and post- airgap. The airgaps will be
emptied after other dispensing functions.
Increased Steps can be edit between 1 to 10. It is the number of di erent aspiration
points from Start Depth to End Depth. After user changes the Increased Steps above
1, the Aspirate Depth will be changed from 1 slider to 2 sliders. Notice that the Start
Depth needs to be less than or equal to the End Depth.
To Next Page
Loading...