Need help?Do you have a question about the SPT SD-40E and is the answer not in the manual?
General| Model | SD-40E |
|---|---|
| Type | Dehumidifier |
| Humidity Control | Adjustable humidistat |
| Capacity | 40 pints |
| Noise Level | 51 dB |
| Drainage Option | Continuous drainage |
| Coverage Area | 2, 500 sq. ft. |
| Operating Temperature | 41°F - 89°F |
Describes the function of preventing mold growth on clothing and in cupboards.
Describes the function of preventing condensation on surfaces.
Explains effectiveness on items like musical instruments and cameras.
Describes removal of dampness from bookshelves and closets.
Warning against using damaged AC electrical sockets for connection.
Instruction to ensure covers and containers are fitted before switching on.
Advice to always switch the unit off when not in use or unplugging.
Warning against placement near heat sources like radiators or heaters.
Warning against placement in areas where oil or water may splash.
Warning against placing the unit under direct sunlight.
Warning against placement near baths, showers, or swimming pools.
Warning against using the unit in a greenhouse.
Caution against inserting fingers or objects into unit openings.
Instruction for unit to stand upright for 24 hours after moving.
Advice to always unplug the unit before performing cleaning or maintenance.
Warning against covering the unit or its air inlets/outlets.
Warning against spraying insecticides or flammable sprays on the machine.
Warning against spraying water directly onto the unit.
Instruction to contact manufacturer for damaged units or cords.
Instruction to empty the water tank before moving the dehumidifier.
Information about the auto-defrost feature for continuous operation.
Press to turn the unit ON or OFF. Starts operation at 60% RH.
Press to set the unit to continuous dehumidifying mode.
Press to set the unit to high fan speed.
Press to set the unit to low fan speed.
Indicates the power connection and ON/OFF status.
Lights up when continuous dehumidifying mode is selected.
Lights up when the water tank is full, stopping operation.
Increases the humidity setting in 5% increments (35%-80% RH).
Decreases the humidity setting in 5% increments (80%-35% RH).
Lights up when the TURBO button is pressed for high fan speed.
Lights up when the NORMAL button is pressed for low fan speed.
Illuminates when the water bucket is ready for emptying or not in place.
Unit stops automatically when bucket is full or set humidity is reached.
Automatically removes frost from evaporator coils for continuous operation.
Restores previous settings and restarts after a power failure.
Place on flat surface, avoid obstructions, maintain clearances from walls and appliances.
Specifies operating temperature range and restart delay after shutdown.
Instructions for plugging into a suitable 115V~60Hz grounded socket.
Steps to power on the unit, including self-check and initial settings.
Press the POWER button to turn off the unit; unplug for long periods.
Instructions for removing, emptying, and re-inserting the water tank.
Steps to attach a drain hose for continuous water removal.
Warnings about unplugging before cleaning and avoiding chemicals/water.
Frequency and method for cleaning the air filter to maintain performance.
Method for cleaning the exterior surfaces using a soft cloth.
Instructions for washing the water tank with warm water and detergent.
Instruction on how to wrap and bundle the power cord for storage.
Checks for power, cord connection, tank placement, and tank fullness.
Checks for blocked filter, open windows, or improper settings/temperature.
Checks for blocked filter or unstable unit/floor placement.
Notes that frost is normal and related to the Auto-Defrost feature.
Checks for loose drain hose connection or removed back drain plug.
Indicates defrosting start; unit will restart automatically after.
Indicates the water tank is full and needs to be emptied.
Indicates humidity sensor issue; contact support if problem persists.
Indicates temperature sensor issue; contact support if problem persists.
Details on free repair for faulty materials/workmanship within one year.
Conditions for warranty, including notification, proof of purchase, and authorized repair.
Exclusions from warranty, such as freight charges and consequential damages.
Company address, phone number, and website for support and service.
To Next Page
