SPX Reformer - Replacement Parts Information; Fixed Rollers; Floating Rollers

11
Floating Roller
Bronze Bushing
Replacement Parts
Fixed Rollers
With carriage removed from rails, attach fixed roller with the
aid of a ratchet and 12 mm (15/32") socket attachment. Ensure
fixed rollers are securely fastened. Follow directions on removing
carriage (see page12) and replacing carriage (see page16).
Clean new rollers with a soft, damp cloth prior to installing.
Floating Rollers
With carriage removed from rails, slide floating rollers
into bronze bushings. Then follow directions for replacing
carriage(seepage16). Clean new rollers with a soft,
dampclothprior to installing.
CAUTION: Never use oil lubricants as they may damage rollers.
Traditional Spring Package, 5 Springs ST-05057
High-Precision Spring Package, 5 Springs ST-05058
Power Up Spring Package, 5 Springs ST-05098
Carriage Stopper ST-06012
Fixed Rollers, pair ST-06013
Floating Rollers, pair ST-06014
Foam-Grip Handles, pair ST-02007
Footbar, SPX (Double) ST-05085
Footstrap ST-02018
Gripper Mat ST-02022
Maple Roll-Up Pole ST-06008
Mat Converter, SPX – Black ST-02075
Mat Converter, SPX – Blue ST-06279
Padded Long Spine Straps, pair ST-02016
Padded Platform Extender, SPX – Black ST-02074
Padded Platform Extender, SPX – Blue ST-06271
Reformer Box, SPX – Black ST-02000
Reformer Box, SPX – Blue ST-06273
Soft Reformer Loops, pair ST-02009
Shoulder Rest Pads, pair – Black ST-02023
Shoulder Rest Pads, pair – Blue ST-05140
Spring Sleeve ST-05070
Spring Clip ST-02020
Traditional Ropes, pair – Black ST-06289
Traditional Ropes, pair – White ST-06016
Visit merrithew.com/shop/replacement-parts for these replacement parts and optional accessories
Reformer Box
Reformer boxes can be used to facilitate or modify exercises.
Positioning the Reformer Box
w Place Reformer box on top of carriage with either long or
shortside facing forward.
w Box can be placed over or against shoulder rests
in the “short box” position.
Footstrap
Footstrap is included with purchase of a Reformer box.
Attaching the Footstrap
w Loop footstrap around wooden standing platform and adjust
the length by attaching spring clip to one of the three D-rings.
w Footstrap should be adjusted so that there is tension with
knees slightly flexed. It is important to keep feet hooked
securely under footstrap.