Need help?Do you have a question about the SPXFLOW Votator II and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Capacity | Varies by model |
| Power Consumption | Varies by model |
| Operating Pressure | Varies by model |
| Temperature Range | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
Process for submitting warranty claims and required authorization.
Procedure for reporting transit damage or loss of equipment.
Recommended industrial safety standards for operation.
Safety requirements for disconnecting and locking out equipment power sources.
Guidelines for regular equipment inspections to ensure safe operation.
Overview of available Votator II models and their specifications.
Describes the different media configurations for the Votator II unit.
Instructions for connecting electrical power to the Votator II unit.
Details on the types and installation of mechanical seals used in the unit.
General recommendations for piping installation and support.
Essential checks to perform before initial startup of the Votator II.
Step-by-step guide for starting the Votator II in different applications.
Instructions for safely shutting down the Votator II unit.
Daily and weekly maintenance tasks for horizontal and vertical units.
Procedures for inspecting, removing, replacing, and sharpening scraper blades.
Steps for removing the heat exchanger tube from a horizontal unit.
Procedures for servicing and maintaining mechanical seals.
Common causes and suggested actions for freeze-up issues.
Troubleshooting guide for various product leakage points.
Identifying and resolving issues related to water and air in the refrigeration system.
To Next Page