Need help?Do you have a question about the Spyder MR1 and is the answer not in the manual?
Step-by-step instructions for preparing the paintball marker for use.
Procedures for safely attaching the CO2 or compressed air tank.
Procedures for safely detaching the CO2 or compressed air tank.
Guidelines for correctly using the barrel blocking device for safety.
Instructions on how to adjust the marker's firing velocity (FPS).
Steps to un-jam a paintball from the marker's breach and barrel.
Guide to cleaning and reassembling the marker's internal components.
Procedure for removing and replacing the cup seal, often indicated by leaks.
Solutions for common operational problems like recocking issues.
Identifying and fixing various sources of air leaks within the marker.
A comprehensive catalog of all replaceable parts for the MR1 marker.
Detailed visual diagrams of the MR1 marker's components and assembly.
General| Caliber | .68 caliber |
|---|---|
| Action | Semi-automatic |
| Air Source | CO2 or Compressed Air |
| Material | Aluminum |
| Type | Mechanical |
| Operating Pressure | 800 psi |
| Firing Mode | Semi-automatic |
| Max Rate of Fire | 15 balls per second |
| Firing Rate | 15 BPS |
| Barrel Thread | Spyder |
| Feed System | Gravity feed |
| Hopper Compatibility | Standard gravity-fed hoppers |
| Color Options | Black, Blue, Red |
To Next Page
