Spyder MR6 - User Manual

.68 CAL SEMI-AUTO MARKER

Summary

Rules of Safe Paintball Marker Handling

Operation Guide; Start Up

MR6 Barrel Install; Remove; Setup

Proper Use of Barrel Blocking Device

Installing a CO2; Compressed Air Tank

Installing Carrying Handle w;Sight

Installing; Removing a Paintball Loader

Loading Paintballs in the Magazine

Releasing the Magazine

First Strike Paintball Warning

Installing; Removing a Shoulder Stock

Velocity Adjustment Increase; Decrease

A Jammed Paintball

How to Clean the Marker

Squeegee Cleaning of Barrel and Breach

Details methods for cleaning paint residue from the barrel and breach using squeegees.

Disassemble Rear Internals

Reassemble Rear Internals

Barrel Shroud Removal

Eko Cup Seal Removal

Air Leak from the Hose Line

Dealing with an Air Leak

Troubleshooting

Dealing with a Paintball Breakage

Addresses paintballs breaking inside the marker due to temperature, age, or velocity.

Recocking Related Issues

Covers lubrication, damaged O-rings, low tank pressure, and debris in receiver.

MR6 Schematics

MR6 Parts List

Warranty Repair Return Procedure

Spyder MR6 Specifications

General

Caliber	.68
Air Source	CO2 or Compressed Air
Firing mode	Semi-Automatic
Body Material	Aluminum
Weight	2.8 lbs
Barrel Length	12 Inches