SPYKER 76-22 - Tow Bar Assembly

4
5. Insert Clevis Pin
(43) into Hitch
Plates and fasten
with Cotter Pin (42).
Tow Bar Assembly
6. Attach On/Off Lever
Control (46) to Tow
Bar assembly using
2 bolts (32) and
nuts (33).
Proceed to page 9 for instructions on connecting cable to
Rate Gate Linkage.
3
3. Attach braces (8)
to frame with bolts
(37) and nuts
(34). Attach
braces to towbar,
and towbar to
frame using 2
bolts (35) and
nuts (34).
4. Attach Hitch
plates (44) to Tow
Bar assembly
using 2 bolts (35)
and nuts (34).
Tow Bar Assembly