Need help?Do you have a question about the Squier J5 Telecaster and is the answer not in the manual?
General| Body Shape | Telecaster |
|---|---|
| Neck Material | Maple |
| Fingerboard Material | Rosewood |
| Frets | Medium Jumbo |
| Hardware | Chrome |
| Scale Length | 25.5" |
| Finish | Polyurethane |
| Neck Shape | C-Shaped |
| Fingerboard Radius | 9.5" |
| Nut Width | 1.650" |
| Tuners | Standard Cast/Sealed |
Top tuning machines for string tension adjustment.
Guides strings over the nut for proper placement.
Hardware for attaching a guitar strap.
Unit for string anchoring and intonation adjustment.
Input jack for audio signal connection.
Mounts and protects electronic control components.
Anchors for strings passing through the guitar body.
Protects the guitar body from pick scratches.
Selects between neck and bridge pickups.
Protective cover for the toggle switch.
Adjusts overall output volume.
Knob for operating the volume control.
Pickup located near the neck for warmer tone.
Pickup located near the bridge for brighter tone.
Mounts the bridge and pickup.
Connections for neck and bridge pickups to controls.
Wiring from controls to the external output jack.
Ground wire connections to control cavity and bridge plate.
Guidelines for lead-free solder and connection points.
Illustrates pickup selection based on switch position.
Explanation of volume knob functions.
To Next Page