Squier Jagmaster User Manual

Squier Jagmaster
Rosewood- m/n 0320700xxx
Loc # Description Part Number
1 Standard Tuners (set of 6) 007-7448-000
2 Bone Nut (blank) (2) 099-4920-000
3 Vintage String Guide 099-4910-000
4 Strap Buttons (2) 099-4915-000
5 Pickguard (parchment) 007-7450-000
5 Pickguard (tortoise shell) 007-7451-000
5a Pickguard Screws 099-4923-000
6 Neck Pickup 007-7452-000
7 Bridge Pickup 007-7453-000
8-9 500K Solid Shaft Pot (Set of 2) 005-5440-000
8-9a Volume/Tone Knobs (set) (black) 099-1365-000
10 Output Jack 007-7443-000
11 Bridge Assembly 007-7454-000
12 Tremolo Arm 007-7455-000
Last Revision Date: 7/15/2008
Page 1 of 2

Squier Jagmaster Specifications

General

Body Material	Basswood
Neck Material	Maple
Fingerboard Material	Rosewood
Number of Frets	22
Pickup Configuration	HH
Hardware	Chrome
Tuners	Standard Die-Cast
Scale Length	24"
Bridge	Synchronized Tremolo
Controls	Volume, Tone, 3-Way Toggle Switch

Summary

Squier Jagmaster Parts List

Standard Tuners

Set of 6 standard tuning machines for the guitar.

Bone Nut

Blank bone nut, supplied as a set of two.

Vintage String Guide

Component for guiding guitar strings.

Strap Buttons

Set of two strap buttons for guitar strap attachment.

Pickguard Options

Available pickguards in parchment and tortoise shell.

Neck Pickup

The pickup located at the neck position of the guitar.

Bridge Pickup

The pickup located at the bridge position of the guitar.

Potentiometers and Knobs

500K solid shaft pots and black volume/tone knobs.

Output Jack

The jack for connecting the guitar's output signal.

Bridge Assembly

Complete assembly for the guitar bridge.

Tremolo Arm

Arm component for the guitar's tremolo system.

Wiring Diagram

Pickup Wiring

Diagram showing connections for neck and bridge pickups.

Control Circuitry

Wiring for potentiometers, output jack, and ground.