SRA 250 - User Manual

1
250 H2O Welder
Operating Manual
Congratulations on the purchase of your SRA-250 H20 Welder. With this welding
unit you can now experience the many advantages of the H20 welding process.
The SRA-250 has been designed to use low voltage electricity to dissociate water
into hydrogen and oxygen. It is safe, simple and reliable and ideal for quick, clean
soldering and brazing.

Summary

SAFETY PRECAUTIONS

General Safety Guidelines

Essential safety precautions and warnings for operating the H20 Welder, including caustic solution handling.

WELDER DIAGRAM

PARTS LIST FOR WELDER DIAGRAM

USING THE H20 WELDER

Start Up Procedure

Step-by-step guide for initial setup, filling tanks, and powering on the H20 Welder.

ROUTINE MAINTENANCE

Fluid Level Checks and Refills

Procedures for checking and maintaining methyl alcohol and distilled water levels daily and periodically.

TIP SIZE AND POWER CONTROL SETTING

Warranty Information

SRA 250 Specifications

General

Brand	SRA
Model	250
Category	Welding System
Language	English