Need help?Do you have a question about the SRAM RockShox Deluxe RT3 and is the answer not in the manual?
General| Type | Rear Shock |
|---|---|
| Remote | No |
| Spring Type | Air |
| Adjustments | External Rebound, 3-position compression (Open, Pedal, Lock) |
| Spring | DebonAir |
| Product Type | Rear Shock |
| Eye to Eye | 190mm, 210mm, 230mm |
Details the scope and limitations of the SRAM limited warranty for bicycle components.
Explains how local laws may affect or modify the warranty statement's terms.
Outlines exclusions for indirect, special, incidental, or consequential damages.
Specifies conditions under which the warranty is void, such as improper installation or normal wear.
Advises wearing safety glasses and protective gloves when servicing RockShox products.
Illustrates the components of the Deluxe RT3, RT, RL, and R rear shock models.
Illustrates the components of the Deluxe RLR rear shock model.
Depicts the components of the Deluxe bearing mount system.
Outlines the maintenance schedule based on service hours for optimal performance.
Provides charts to log shock settings for reference during service.
Lists critical torque specifications for various shock parts and fasteners.
Step-by-step guide for removing the remote cable and housing on RLR models.
Instructions for servicing the shock's mounting hardware and eyelet bushings.
Specific steps for removing worn or damaged eyelet bushings from the shock.
Instructions on how to properly remove bearings from the bearing mount.
Step-by-step guide for installing new bearings into the bearing mount.
Details the process of replacing bearings within the damper assembly.
Lists all necessary parts, tools, and fluids for servicing the Deluxe shock.
Step-by-step guide for removing the air can from the shock.
Guide to recording rebound and compression settings before air can removal.
Instructions for adjusting air volume using tokens to tune progression.
Steps for removing and replacing O-rings, seals, and wiper seals in the air can.
Procedures for safely releasing air pressure from the damper before service.
Detailed steps for servicing the main piston and compression rod assembly.
Instructions for removing the IFP and replacing its O-ring.
Guides on filling the damper with oil and seating the IFP correctly.
Steps for servicing the remote spring and associated bushing for RLR models.
Instructions for installing the Counter Measure™ and lubricating the air can.
Detailed process for installing new bushings into the shock eyelets.
Step-by-step guide for installing the mounting hardware onto the shock eyelets.
Guides on installing the ferrule and securing the cable set screw for RLR models.
To Next Page