17 18
To ensure a safe and satisfying golfing
experience, please be sure to follow these Important Precautions.
Important
Precautions
The manufacturer assumes no liability for injury or product damage due to failure to comply with the instructions herein.
Be sure to read the Important Precautions carefully and exercise appropriate care.
Rules of Golf
You may not change the QTS sleeve position
or exchange weights during a round.
SRIXON Z Series clubs conform with R&A-approved Rules of Golf. However,
it is against the rules to modify club performance during a round by changing
the QTS sleeve position or exchanging weights to change the CG position,
as this breaches the Rules of Golf regulation 4-2a,
which states: “During a stipulated round, the playing characteristics of
a club must not be purposely changed by adjustment or by any other means.”
Before using
Carefully inspect the QTS sleeve and tuning weight prior to each round
of golf or practice session to confirm that they are properly secured.
If the tuning weight is not secured firmly in the weight port when
swinging the club during a game or practice session, there is
a possibility that the weight could fly off, injuring either you or a bystander.
1
Tighten until you hear a 'click'.
If you fail to properly secure the
sleeve, there is a possibility that
the head may come off in mid
swing, injuring either you or a
bystander.
2
Check to see that the QTS sleeve is properly secured.
Check to see that the tuning weight is locked securely in position.
Tighten until you hear a 'click'.
Tuning weight performance guide
*This product is only available in
selected areas
(
countries
)
due to
limited quantities.
Z765 Limited Model Driver
Weight port
(
toe
)
Installing a heavy weight
on toe side and light weight
on the heel side creates a
longer CG.
Installing a heavy weight
on heel side and light weight
on the toe side creates a
shallower CG.
Heavy
Light
Heavy
Light
Weight port
(
heel
)
*3g weight on toe side and 9g weight on heel side are installed at purchase
15 16
* The shape of this model’s tuning weight differs from 2010, 2012, 2014 models.
“If ball flight goes
left or hook”
A heavier weight on the toe moves
the CG towards the toe.
“If ball flight goes
right or slice”
A heavier weight on the heel moves
the CG towards the heel.
Trajectory at initial setting Trajectory after tuning
Trajectory at initial setting Trajectory after tuning
*Hook/Slice trajectory performance will be reverse for Left Handed model
*Image *Image
Extra weight cartridges Made in China
9g
(
stainless
)
11g
(
tungsten-nickel
)
13g
(
tungsten-nickel
)
15g
(
tungsten-nickel
)
3g
(
aluminum
)
5g
(
titanium
)
7g
(
stainless
)
Tuning weight performance guide
*This product is only available in
selected areas
(
countries
)
due to
limited quantities.
Z765 Limited Model Driver
Weight port
(
toe
)
Installing a heavy weight
on toe side and light weight
on the heel side creates a
longer CG.
Installing a heavy weight
on heel side and light weight
on the toe side creates a
shallower CG.
Heavy
Light
Heavy
Light
Weight port
(
heel
)
*3g weight on toe side and 9g weight on heel side are installed at purchase
15 16
* The shape of this model’s tuning weight differs from 2010, 2012, 2014 models.
“If ball flight goes
left or hook”
A heavier weight on the toe moves
the CG towards the toe.
“If ball flight goes
right or slice”
A heavier weight on the heel moves
the CG towards the heel.
Trajectory at initial setting Trajectory after tuning
Trajectory at initial setting Trajectory after tuning
*Hook/Slice trajectory performance will be reverse for Left Handed model
*Image *Image
Extra weight cartridges Made in China
9g
(
stainless
)
11g
(
tungsten-nickel
)
13g
(
tungsten-nickel
)
15g
(
tungsten-nickel
)
3g
(
aluminum
)
5g
(
titanium
)
7g
(
stainless
)
To Next Page
Loading...
