Page 2
OVERVIEW
The FTSs Pro Modular Temperature Controller works in conjunction with a pressurized glycol system to
provide temperature control over the contents of your vessel. It functions by using a temperature sensor
to read the present value (PV) of your vessel, and triggering an output based on the set value (SV) in
order to match PV with SV. When cooling is called for, the solenoid valve will open to allow the ow of
glycol through your vessel’s cooling jackets or coils until the set value is achieved.
INTRODUCTION
Temperature
OFF
Run Crash
FTSs Pro Controller
Solenoid Valve
To Next Page
Loading...
Need help?
General
