INSTRUMENTS AND CONTROLS 3–19
CAUTION
Wiper operation on dry windshield
can scratch glass and wear the
blades prematurely.
Do not operate wipers when wind-
shield is dry.
CAUTION
Wiper operation with obstructions,
such as snow, can damage wiper
motor.
Clear obstruction before operating.
CAUTION
Wiper blades can freeze to wind-
shield in cold weather.
Wiper operation while the blades are
frozen can damage the wiper motor.
Check blades are not frozen to wind-
shield before operating.
Intermittent Wiper Control
The interval of wiper swings can be ad-
justed by twisting the control knob upward
or downward when the windshield wiper
switch is in “INT” position.
• F : Fast interval
• S : Slow interval
The intermittent wiper operates automatically
according to the vehicle speed when the
wiper switch is in the “INT” position.
WINDSHIELD WIPER SWITCH
To operate the windshield wipers, move the
lever in 3 downwards steps with the igni-
tion on.
OFF = off
INT = Intermittent wipe
LO = Continuous wipe, slow speed
HI = Continuous wipe, fast speed
To Next Page
Loading...
Need help?
General
