SSD Drives 590 Series User Manual

 Copyright 2005 SSD Drives Limited (formerly Eurotherm Drives Limited)
All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any form or by
any means to persons not employed by an SSD Drives company without written permission from SSD Drives Ltd.
Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to
make amendments or correct omissions. SSD Drives cannot accept responsibility for damage, injury, or expenses
resulting therefrom.
590 Series
DC Digital
Converter
Product Manual
HA467078 Issue 5
Compatible with Version 4.x Software

SSD Drives 590 Series Specifications

General

Brand	SSD Drives
Model	590 Series
Category	Media Converter
Language	English

Summary

INSTALLING THE CONVERTER

Electrical Installation

General instructions and warnings for electrical connections.

Minimum Connection Requirements

Essential wiring for basic operation.

Power Wiring Connections

Details on connecting main power, contactors, and line chokes.

Control Wiring Connections

Instructions for connecting analog and digital control signals.

OPERATING THE CONVERTER

Pre-Operation Checks

Essential checks before applying power to the system.

Setting-up the Converter

Initial configuration steps including calibration.

Initial Start-up Routine

Step-by-step guide for initial drive operation.

THE MAN-MACHINE INTERFACE (MMI)

PROGRAMMING YOUR APPLICATION

Programming with Block Diagrams

Introduction to block diagram programming.

Function Block Descriptions

Overview of available function blocks and their parameters.

CURRENT LOOP

Parameters for configuring the current control loop.

DIAGNOSTICS

Monitoring drive status, variables, and I/O.

FIELD CONTROL

Parameters for controlling motor field voltage and current.

SPEED LOOP

Parameters for configuring the speed control loop.

TRIPS AND FAULT FINDING

Trips

What happens when a trip occurs and MMI indications.

Fault Finding

Troubleshooting guide for common problems.

ROUTINE MAINTENANCE AND REPAIR

CONTROL LOOPS

Current Loop

Details on current control, adaptive control, and BEMF estimate.

Speed Loop

Explanation of speed loop operation and feedback.

Field Control

Parameters for controlling motor field voltage and current.

CERTIFICATION FOR THE CONVERTER

Requirements for EMC Compliance

Requirements for UL Compliance

SERIAL COMMUNICATIONS

Main Serial Port (P1)

System Port (P3)

THE DEFAULT APPLICATION

Block Diagrams

Main Block Diagram

Functional Block Diagram