SSD Drives 590+ Series User Manual

590+ Series
DC Digital Drive
Product Manual
HA466461U003 Issue 5
 Copyright 2005 SSD Drives Limited (formerly Eurotherm Drives Limited)
All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any form or by
any means to persons not employed by an SSD Drives company without written permission from SSD Drives Ltd.
Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to
make amendments or correct omissions. SSD Drives cannot accept responsibility for damage, injury, or expenses
resulting therefrom.
Compatible with Version 7.x Software

SSD Drives 590+ Series Specifications

General

Brand	SSD Drives
Model	590+ Series
Category	Storage
Language	English

Summary

Installing the Converter

Mechanical Installation

Covers the physical installation aspects, including unpacking and mounting procedures.

Electrical Installation

Details the necessary electrical connections, safety warnings, and cabling requirements.

Operating the Converter

Pre-Operation Checks

Lists essential checks to perform before applying power to the converter and system.

Setting-up the Converter

Guides through the initial setup process, including control board calibration.

Programming Your Application

Programming with Block Diagrams

Introduces block diagram programming for application customization.

Function Block Descriptions

CURRENT LOOP

Details parameters for configuring the drive's conventional current/torque loop.

Trips and Fault Finding

Trips

Explains what happens when a trip occurs and how the converter indicates it.

Fault Finding

Provides a guide to diagnosing and resolving common operational problems.

Routine Maintenance and Repair

Control Loops

Principle of Operation

Technical Specifications

EMC Compliance

Electrical Ratings - Power Circuit

Provides detailed electrical ratings for power circuits across different frames.

Certification for the Converter

Requirements for EMC Compliance

Serial Communications

Communications Technology Option

The Default Application

Block Diagrams