Need help?Do you have a question about the SSS Siedle AIB 150 series and is the answer not in the manual?
General| Installation | Wall-mounted |
|---|---|
| Door release button | Yes |
| Light button | Yes |
| Adjustable Ringer Volume | Yes |
| Housing Material | Plastic |
| Weight | 200 g |
| Type | Indoor station |
| Call tone | Electronic |
| Power Consumption | 0.5W |
| Wiring System | 2-wire |
Critical safety warnings regarding electrical installation and hazards.
Details on assigning users to different device types and their configurations.
Explanation of the basic single-line installation setup for the In-Home bus video system.
How to use bus distributors in a single-line system for extended configurations.
Details on flush-mounted bus distributors and their application.
Information on top-hat rail mountable bus distributors and their usage.
Overview of door loudspeaker modules and call button options for In-Home video systems.
Description of different Siedle door station models (Classic, Steel) for video systems.
Specifications and types of bus and external cameras compatible with the system.
Details on various bus distributors and the bus video modulator unit.
Information on necessary power supplies and line rectifiers for system operation.
Features and functionalities of smart gateways, software, and PC interfaces.
General guidelines for installing In-Home bus video devices, including terminating resistors.
Wiring diagram for installing Siedle Vario systems with BVPS/BVPC 850-0 video panels.
Installation diagram for Siedle Vario systems using SG 150/650-0 smart gateways.
Wiring diagrams for audio and video installations with Siedle Vario.
Wiring diagram for a multiple-line audio & video system setup.
Step-by-step guide for manual programming of In-Home bus system components.
Instructions on how to activate the programming mode on the bus line rectifier.
Procedures for activating programming mode on different types of bus door loudspeakers.
How to activate programming mode on various indoor devices like telephones and gateways.
Specific steps to activate programming mode on Jung indoor stations.
Fundamental principles and conditions for using Plug+Play programming.
Instructions for programming the In-Home system using PC software and interface.
How to actuate the door release function in different system configurations.
Procedures for restarting, exchanging, and managing device operating modes.
To Next Page