To Next PageTo Next Page
Need help?Do you have a question about the SSS Siedle SET CVB 850-1 E/W and is the answer not in the manual?
General| Brand | SSS Siedle |
|---|---|
| Model | SET CVB 850-1 E/W |
| Category | Intercom System |
| Language | English |
Details the integrated camera, loudspeaker, voice volume, and call buttons for the CV 850 model.
Details the TFT display, colour/brightness settings, speech/call volume, call tones, and LED status for VIB 150.
Details bus addresses, door release, and light contact for the SNG 850 model.
Safety precautions for installation and use by qualified electricians, including altitude limits.
Instructions to avoid device damage due to electrostatic discharge.
Lists the components included in the SET CVB 850-1.
Lists the components included in the SET CVB 850-2.
Step-by-step guide for surface mounting the CV 850 door station.
Instructions for clipping the line rectifier onto the top hat rail for SNG 850.
Steps for mounting the VIB 150, including cable preparation and base plate installation.
Describes simple commissioning using Plug+Play.
Details components that can extend the Basic set functionality.
Explains Plug+Play as a simple commissioning method for users without experience.
Procedure for resetting Plug+Play programming to re-attempt setup.
Illustrates the step-by-step process for activating and using Plug+Play programming.
Procedure for manually assigning call buttons to indoor devices.
Describes functions like Storey call, Switching on light, Muting the bell, and Accepting door calls.
Explains the meaning of LED 1 flashes for system status and programming modes.
Explains the meaning of LED 2 flashes for faults like too many users or incorrect connections.
Technical details for CV 850 including system, resolution, lens, angle, lighting, and dimensions.
Technical details for VIB 150 including operating voltage, current, ambient temperature, and dimensions.
Technical details for SNG 850 including voltage, current, output, fusing, contacts, and dimensions.
