SSS Siedle BVPS 850-0 - Display and Servicing; Display Mode; Deleting Images; Reset to Default Settings

13
The camera image can either be dis-
played in format 4:3 (standard) or as
a full screen image.
Under Settings > Video image >
Display mode set which size you
wish to set as standard in response
to a door call.
• Standard
• Full screen
With an active door call or speech
connection, use the button∨ to
switch to the “Full screen” display
mode or the button∧ to switch to
the “Standard” display mode.
Display mode
Reset to default settings and
basic settings
Resetting the panel to the as-deliv-
ered status will only affect settings
which you can change at the panel,
such as the ring tones or display
settings.
Programming by the electrical
installer will not be lost.
1 Open the menu
Settings>
Factory setting.
2 Press the Enter button to reset the
panel to the default setting.
As soon as the process has been
completed, the menu Settings>
Language appears and you are
guided through the basic settings.
3 Carry out the following settings in
sequence:
• Language
• Time format
• Automatic time changeover
(summertime/ normal time)
• Date format
• Date and time
Conrm every setting process you
have performed with the Enter
button.
Once the basic settings have been
performed, the main menu appears
in the display.
Servicing work
Deleting images
It is only possible to delete the com-
plete video memory.
1 Open the menu
Settings >
Video memory.
2 Select “Delete all pictures”.
The enquiry “Deleting complete
video memory. Are you sure?” will
appear.
3 To conrm, select “Yes” and press
the Enter button.