EasyManua.ls Logo

ST Engineering Electronics Newtec iDirect MDM3315 - User Manual

ST Engineering Electronics Newtec iDirect MDM3315
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Modem Interfaces
Category
Description
Tx Interface
Connector
F-Type 75 Ohm
Frequency Range
950-2400 MHz
TX Level -55 dBm to +5 dBm (Dialog)
-45 dBm to + 5 dBm (Velocity)
BUC Power Supply 24V / 4A or 43~44VDC 3.5A
software selectable
BUC Reference
10/50 MHz
BUC Reference Level
0 dBm
Rx Interface
Connector
F-Type 75 Ohm
Frequency Range
950-2150 MHz
LNB power Supply
13/18VDC 500mA
LNB band Selection
13/18V or 22kHz tone, programmable
LNB Polarization
Selection
13/18 or 22 kHz tone, programmable
Data Interface
LAN: Four 10/100/1000 Mbps Ethernet, auto
MDI/MDIX
Mechanical and Environmental Specifications
Category
Description
Dimensions
W 22cm x D 33cm x H 4cm (W8.66 in x D 12.99 in x
H 1.57 in)
Weight
1.7 kg (3.75 lbs)
Temperature, Operational
0° to +55°C (32° to +131°F)
Temperature, Storage
-30° to +60°C (-22° to +140°F)
Humidity, Operating
5 - 95% non-condensing
Power Supply
Category
Description
Input Voltage
48 VDC, 4 Amps input
Adapter
AC, 50Hz\220-260V and 60Hz\100-130V
-48VDC
Power Consumption
60W maximum
Management
Category
Description
Protocols Supported
UDP, IPv4 & IPv6, ICMP, TCP, IGMPv1, IGMPv2,
ARP, DHCP, DNS, NTP, Diffserv Marking
Web GUI
Manage web GUI via configurable management IP
address.
ST Engineering (Europe) CY N.V.
Laarstraat 5
9100 Sint-Niklaas
Belgium
ST Engineering (US)
13861 Sunrise Valley Drive, Suite 300
Herndon, VA 20171-6126
USA
© 2022 ST Engineering iDirect (Europe) CY N.V., and/or its affiliates. All
rights reserved.
Reproduction in whole or in part without permission is prohibited.
Inf ormation contained herein is subject to change without notice. The
specifications and information regarding the products in this document
are subject to change without notice. While every effort has been made
to ensure the accuracy of the statements, information, and
recommendations in this document, they are provided without warranty of
any kind, express, or implied. Users must take full responsibility for their
application of any products. Trademarks, brand names and products
mentioned in this document are the property of their respective owners.
All such references are used strictly in an editorial fashion with no intent
to convey any affiliation with the name or the product's rightful owner.
Document Name: 59284_MDM3315_ QS G
SAP Document Number: 59284
Agile Document Number: T0001348 (Rev A)
MDM3315 Satellite Modem
Quick Start Guide
Question and Answer IconNeed help?

Do you have a question about the ST Engineering Electronics Newtec iDirect MDM3315 and is the answer not in the manual?

Summary

Modem Interfaces

Tx Interface

Details of the transmitter interface including connector, frequency range, and TX level.

Rx Interface

Details of the receiver interface including connector, frequency range, and LNB settings.

Data Interface

Information on the data interface, specifying LAN connectivity and Ethernet standards.

Mechanical and Environmental Specifications

Dimensions and Weight

Physical dimensions and weight of the satellite modem.

Temperature and Humidity

Operational and storage temperature ranges, plus humidity guidelines.

Power Supply

Input Voltage and Adapter

Details on the required input voltage and the type of adapter used.

Power Consumption

Maximum power consumption rating for the device.

Management

Protocols Supported

List of network protocols supported for modem management.

Web GUI

Information on accessing the modem's web-based graphical user interface.

Product Description

Modem Capabilities

Overview of the MDM3315's flexibility, waveform technologies, and wideband operations.

Service Applications

Supported services including Internet, VoIP, enterprise, and backhauling.

Physical Interfaces

Front Panel Interfaces

Description of LED status indicators and LAN indicators on the front panel.

Rear Panel Interfaces

Details on rear panel connectors including TX, RX, clock reference, and data interfaces.

Safety and Cautions

General Safety Warnings

Important warnings regarding installation, power cord handling, and grounding.

Connecting Power

Instructions and warnings for safely connecting the device to a power source.

Connecting to the Modem

Network Cable Connection

Steps for connecting the modem via network cable to a computer.

Web Interface Access

Instructions for accessing the modem's web interface via IP address.

ST Engineering Electronics Newtec iDirect MDM3315 Specifications

General IconGeneral
ModulationQPSK, 8PSK, 16APSK, 32APSK
Operating Temperature0°C to +50°C
Weight1.5 kg
Frequency Range950 MHz to 2150 MHz
Symbol Rate1 Msps to 45 Msps
FECLDPC, BCH
Interface10/100/1000Base-T Ethernet
Power Supply100-240 VAC, 50/60 Hz