AL-1: This is your main alarm (e.g. regular daily wake-up alarm)
To use: Switch to the AL-1 mode. Press R to switch OFF. Press R again to switch ON. After
60 seconds, the watch automatically returns to the Normal mode. In this mode, if the alarm is
armed, it will show with a solid underline in the mode bar. When the alarm beeps, press any
button to turn off.
To set: Switch to the AL-1 mode, then press S for 2-3 seconds until minutes flash, then press R
to set minutes. Press S again: hours will flash. Press R to set hours. **Note: ensure you set the
alarm correctly to AM or PM!
AL-2: This is a secondary alarm you can use, without having to reset AL-1
For use and setting, select AL-2, then use and set as AL-1 above.
CHI: See Normal Mode (above).
To Next Page
Loading...