STP: The stopwatch or chronograph is used to time events, with CUM/SPLIT times if required.
To use: Switch to the STP mode. Press S to start timing. Press S again to stop.
Split: To take an intermediate (CUM-Split) time, press R while the stopwatch is running. (SPL will
flash at upper right of display).After 10 seconds, split-time releases and re-joins running time (or
press R again to release immediately.)
Reset: Stop the timing by pressing S. When the stopwatch is stopped, press R to reset the
stopwatch to 00’00”00 .
Range: The stopwatch has a timing range of 24 hours with automatic rollover. It will display times
to 1/100-second resolution for the first hour, with 1-second resolution thereafter.
[MM, SS, 1/100 (minutes, seconds, 1/100 seconds) until 59’59”99 , then HH, MM, SS until
23’59”59 ]
To Next Page
Loading...