ST NUCLEO-L152RE User Manual

August 2020 UM1724 Rev 14 1/68
1
UM1724
User manual
STM32 Nucleo-64 boards (MB1136)
Introduction
The STM32 Nucleo-64 boards based on the MB1136 reference board (NUCLEO-F030R8,
NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB,
NUCLEO-F302R8, NUCLEO-F303RE, NUC
LEO-F334R8, NUCLEO-F401RE,
NUCLEO-F410RB, NUCLEO-F411RE, NU
CLEO-F446RE, NUCLEO-L010RB,
NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE
, NUCLEO-L452RE,
NUCLEO-L476RG
) provide an affordable and flexible way for users to try out new concepts
and build prototypes with the STM32 microcontrollers in the LQFP64 package, choosing
from the various combinations of performance, power consumption, and features. The
ARDUINO
®
Uno V3 connectivity support and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo boards do not require any separate probe
as they integrate the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo boards
come with the comprehensive free software libraries and examples available with the
STM32Cube MCU Packages, as well as direct access to the Arm
®
Mbed
™
online resources
at
http://mbed.org/ .
Figure 1. STM32 Nucleo-64 board
Picture is not contractual.
www.st.com

ST NUCLEO-L152RE Specifications

General

Microcontroller	STM32L152RE
Core	ARM Cortex-M3
Flash Memory	512 KB
SRAM	80 KB
Operating Voltage	1.65 V to 3.6 V
Clock Speed	32 MHz
Communication Interfaces	USART, SPI, I2C, USB
ADC Channels	16
ADC Resolution	12-bit
DAC Channels	2
DAC Resolution	12-bit
Package	LQFP64
On-board Debugger	ST-LINK/V2-1
Operating Temperature	-40°C to +85°C
USB	Yes

Summary

STM32 Nucleo Board Features

Ordering Information for STM32 Nucleo Boards

Development Environment Setup

System Requirements for Development

Supported Development Toolchains

Quick Start Guide for STM32 Nucleo Boards

Getting Started with STM32 Nucleo Boards

Step-by-step guide to configure the board and launch demo software.

NUCLEO-L476RG Bootloader Limitations

Details known issues with the bootloader on specific NUCLEO-L476RG board models.

Hardware Layout and Configuration

Embedded ST-LINK/V2-1 Debugger

Describes the integrated debugger and programmer features on the Nucleo board.

Programming On-Board STM32 with ST-LINK/V2-1

Guide for programming the onboard STM32 using ST-LINK.

Programming External STM32 with ST-LINK/V2-1

Guide for using ST-LINK to program external STM32 MCUs.

Power Supply and Selection Options

Details on powering the board via USB or external sources.

USB Connector Power Input

Explains power delivery and current requirements via USB.

External Power Supply Inputs: VIN and E5V

Describes using VIN and E5V connectors for external power.

External Power Supply Input: +3.3V

USART Communication Setup

Extension Connectors Overview

ARDUINO® Connectors Pin Assignments

Pin assignments and compatibility for ARDUINO Uno V3 connectors.

ST Morpho Connector Pin Assignments