ST STM32 User Manual

January 2023 UM1974 Rev 9 1/85
1
UM1974
User manual
STM32 Nucleo-144 boards (MB1137)
Introduction
The STM32 Nucleo-144 boards based on the MB1137 reference board (NUCLEO-F207ZG,
NUCLEO-F303ZE, NUCLEO-F412ZG, NUCLEO-F413ZH, NUCLEO-F429ZI, NUCLEO-
F439ZI, NUCLEO-F446ZE, NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F756ZG,
NUCLEO-F767ZI, and NUCLEO-H743ZI) provide an affordable and flexible way for users to
try out new concepts and build prototypes with STM32 microcontrollers, choosing from the
various combinations of performance, power consumption and features. The ST Zio
connector, which extends the ARDUINO
®
Uno V3 connectivity, and the ST morpho headers
make it easy to expand the functionality of the Nucleo open development platform with a
wide choice of specialized shields. The STM32 Nucleo-144 boards do not require any
separate probe as they integrate the ST-LINK/V2-1 debugger/programmer. The STM32
Nucleo-144 boards come with the comprehensive free software libraries and examples
available with the STM32Cube MCU Package.
Pictures are not contractual.
Figure 1. Nucleo-144 board (top view) Figure 2. Nucleo-144 board (bottom view)
www.st.com

ST STM32 Specifications

General

Series	STM32
Category	Microcontrollers
Core	ARM Cortex-M0, Cortex-M0+, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-M33
Clock Speed	Up to 480 MHz
GPIO Pins	Up to 144
Communication Interfaces	I2C, SPI, USART, USB, CAN, Ethernet
Package Types	LQFP, BGA, WLCSP
ADC Resolution	12-bit, 16-bit (varies by series)
DAC Resolution	12-bit (varies by series)
Operating Temperature	-40°C to +85°C or +105°C

Summary

Features

Ordering Information

Codification

Development Environment

System Requirements

Development Toolchains

Quick Start

Getting Started

Step-by-step instructions to configure the board and launch the demo.

Hardware Layout and Configuration

Embedded ST-LINK/V2-1

Describes the integrated ST-LINK/V2-1 debugger/programmer.

Power Supply and Power Selection

Explains different power input options and configurations.

USART Communication

USB OTG FS or Device

Describes USB OTG/Device functionality and pin configurations.

Ethernet

Details the Ethernet interface and its pin assignments.

Solder Bridges

Extension Connectors

ST Zio Connectors

ST Morpho Connector

Federal Communications Commission (FCC) and ISED Canada Compliance Statements

FCC Compliance Statement

Details compliance with FCC rules, including Part 15.

ISED Compliance Statement

Details compliance with ISED Canada regulations.

CE Conformity

Warning