EasyManuals Logo

ST STM32 User Manual

ST STM32
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
UM1974 Rev 9 7/85
UM1974 Ordering information
84
2 Ordering information
To order the STM32 Nucleo-144 board, refer to Table 1. Additional information is available
from the datasheet and reference manual of the target microcontroller.
Table 1. Ordering information
Order code
Board
reference
Target STM32 Differentiating features
NUCLEO-F207ZG
MB1137
STM32F207ZGT6
Ethernet
USB OTG FS on Micro-AB connector
NUCLEO-F303ZE STM32F303ZET6
Ethernet
Device-only USB on Micro-AB connector
NUCLEO-F412ZG STM32F412ZGT6 USB OTG FS on Micro-AB connector
NUCLEO-F413ZH STM32F413ZHT6 USB OTG FS on Micro-AB connector
NUCLEO-F429ZI STM32F429ZIT6
Ethernet
USB OTG FS on Micro-AB connector
NUCLEO-F439ZI STM32F439ZIT6
Ethernet
USB OTG FS on Micro-AB connector
Cryptography
NUCLEO-F446ZE STM32F446ZET6 USB OTG FS on Micro-AB connector
NUCLEO-F722ZE STM32F722ZET6 USB OTG FS on Micro-AB connector
NUCLEO-F746ZG STM32F746ZGT6
Ethernet
USB OTG FS on Micro-AB connector
NUCLEO-F756ZG STM32F756ZGT6
Ethernet
USB OTG FS on Micro-AB connector
Cryptography
NUCLEO-F767ZI STM32F767ZIT6
Ethernet
On-board USB OTG
USB OTG FS on Micro-AB connector
NUCLEO-H743ZI
(1)
1. Replaced with NUCLEO-H743ZI2.
STM32H743ZIT6
Ethernet
USB OTG FS on Micro-AB connector

Table of Contents

Other manuals for ST STM32

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ST STM32 and is the answer not in the manual?

ST STM32 Specifications

General IconGeneral
SeriesSTM32
CategoryMicrocontrollers
CoreARM Cortex-M0, Cortex-M0+, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-M33
Clock SpeedUp to 480 MHz
GPIO PinsUp to 144
Communication InterfacesI2C, SPI, USART, USB, CAN, Ethernet
Package TypesLQFP, BGA, WLCSP
ADC Resolution12-bit, 16-bit (varies by series)
DAC Resolution12-bit (varies by series)
Operating Temperature-40°C to +85°C or +105°C

Related product manuals